AT-FS750/24-41 Web User Interface Manual
6-14
Figure 46 – Layer2 Management > RSTP > Port Stettings
Parameter
Description
Select
Select a port to apply the changes.
Port
Port ID.
Port Role
Specify the current role of the port.
Port Priority
Specify the spannping tree port priority. Possible value is 0-240. Default is
128.
RSTP Status
To enable or disable the RSTP on this port. Select
Enable
to enable RSTP on
this port,
Disable
to disable it. Default is enabled.
Path Cost
Specify the path cost of the port. Possible value is 0-200000000. Default
65535
Protocol Migration
To control if the port will migrate among MSTP, RSTP and STP automatically if
another switch runs different protocol. Select
True
to enable the protocol
migration function,
Fales
to disable it. Defalue is False.
Admin Edge Port
Specify if this port is edge port or not. Select
True
to enable the portfast
function,
False
to disable it. Default is False.
Adlim Point To Point
Specify the link type of this port.
ForceTure
means link type is point to point;
ForceFalse
means it is shared;
Auto
means the decision will made
automatically. Default is Auto.
AutoEdge Detection
To enable or disable the autoedge detection of this port. Select
True
to enable
the autoedge function,
False
to disable it. Default True.
Restricted Role
To enable or disable the root guard function to prevent the port becoming a
root port. Select
Ture
to enable the root guard function,
False
to disable it.
Default is False.
Restricted TCN
To enable the topology change guard function to prevent the topology change
caused by this port. Select
Ture
to enable the topology change guard
function,
False
to disable it.Default is False.
RSTP Port Status
To display the current RSTP port status.
