AT-FS750/24-41 Web User Interface Manual
6-16
Figure 49 – Layer2 Management > LA > Interface Settings
Parameter
Description
Port Channel ID
Specify the ID of port channel that will apply the changes.
Adlin Status
To activate or shutdown a port channel interface. Select
Up
to activate it,
Down
to shutdown it. Default is UP
MTU
Specify the the Maximum Transmission Unit (MTU) frame size of the
interface.
Click
Add
to submit the changes,
Reset
to clear the value just inputed.
LA Port Channel Settings
This page is to configure the details of a port channel.
Figure 50 – Layer2 Management > LA > Port Channel Settings
Parameter
Description
Port Channel ID
Select a configured port channel group to submit the changes.
Action Type
To add or delete ports from/to a port channel. Select
Add
add ports,
Delete
to
delete one.
Mode
Specify the mode of this port channel. Possible options are
Lacp
and
Manual
.
Default is Lacp
Ports
Specify which port to be included in this port channel.
MAC Selection
Specify the MAC address of the port channel. Select
Dynamic
to let system
assign the MAC address to the port channel automatically, or select
Manual
to use a manual configured MAC address.
Force MAC
Specify the manual configured MAC address of this port channel.
Click
Apply
to submit the configurations,
Reset
to clear the value just inputed.
