AT-FS750/24-41 Web User Interface Manual
1-1
Chapter 1
Preface
About This Guide
This guide provides instructions to install and how to configure the
AT-FS750/24-41 Managed Switch.
This guide is mainly divided into four parts:
1. Hardware Installation: Step-by-step hardware installation procedures.
2. Using Web User Interface: A startup guide to for the command line interface.
3. Command Reference: Information about the function descriptions and
configuration settings.
Terms/Usage
In this guide, the term “Switch” (first letter capitalized) refers to this Switch, and
“switch” (first letter lower case) refers to other Ethernet switches. Some
technologies refer to terms “switch”, “bridge” and “switching hubs”
interchangeably, and both are commonly accepted for Ethernet switches.
Note
Alerts you to supplementary information.
Caution
Indicates potential property damage or personal injury.
Copyright and Trademarks
Information in this document is subjected to change without notice.
© 2009 Allied Telesis Inc.. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Allied
Telesis Inc. is strictly forbidden.
Trademarks used in this text: Allied Telesis and the Allied Telesis logo are
trademarks of Allied Telesis Inc.; Microsoft and Windows are registered
trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Allied Telesis
Inc. disclaims any proprietary interest in trademarks and trade names other than
its own.
