Preface
viii
Assumptions
The differences between the AT-S7 and the AT-S9 are primarily physical. The
following table summarizes these differences.
Contents
The contents of each chapter are described below.
❑
Chapter 1, “Product Description” introduces an overview of
functions and features. This chapter includes information that is
common to both the AT-S7 and the AT-S9.
❑
Chapter 2, “Getting Started” describes how an experienced user can
quickly, and easily, configure an ATM network using ATI’s Omega
management software. This chapter includes information that is
specific to both the AT-S7 and the AT-S9.
❑
Chapter 3, “Ethernet Administration” tells you how to use ATI’s
Omega management Ethernet software.
❑
Chapter 4, “Software” describes several methodologies for
subsequent software support.
Document Conventions
The following conventions are used in presenting information in this manual:
Commands, prompts, and information displayed by the computer appear in
Courier typeface, for example:
Current Number of Learned Addresses: 133
Number of Defined Filters: 4
Menu selections/menu titles appear in Courier bold typeface and prove direct
access through the menus. For example, from the System Administration
submenu, enter the letters
AT
for
ATM Parameters
to access submenu
information.
AT-4016TR >
AT
AT-TS95TR >
AT
Table 1:
AT-S7/AT-S9 Characteristics
AT-4016TR/AT-4016F
AT-TS95TR
AT-S7 PCMCIA Firmware Card
AT-S9 Flash EPROM Cassette
16 10Base-T or Fiber Optic ports
8 10Base-T ports
No backplane
6-port segmented backplane
ATM media port is in back
ATM media port is in front