AT-VP504E FXO
9
2
Installation
This chapter lists the hardware and software requirements of the
AT-VP504E FXO. It also describes how to set it up by introducing the
configuration web pages you will be using in the following chapters.
Hardware and
Software Require-
ments
To work properly, the AT-VP504E FXO requires the following items:
Unpacking the
AT-VP504E FXO
The package of your AT-VP504E FXO contains the following items:
the AT-VP504E FXO device(s)
4 rubber feet for the AT-VP504E FXO
a power cord for the country in which you will be using the
AT-VP504E FXO
Table 8: AT-VP504E FXO Required Items
Item
Description
Remote Party
Endpoints where the AT-VP504E FXO
terminates a call. For example, it could be:
•
a standard telephone/fax
attached to a terminal such as
anAT-VP504E FXS, etc.
•
a Soft Phone
•
an IP phone directly connected to
the IP network
•
etc.
TFTP Server
Necessary for software updates.
DHCP Server
This server supplies all network parameters
to the AT-VP504E FXO such as the IP
address and the subnet mask.
Note: The DHCP server is used only for
automatic configuration.
Syslog Daemon (optional)
The Syslog daemon receives all status
messages coming from the AT-VP504E FXO.
It keeps the administrator informed of any
warning or error messages sent by the
AT-VP504E FXO.
Summary of Contents for AT-VP504E FXS
