Chapter 3 - Administration
Administration Manual (H.323 Version)
AT-VP504E FXO
32
1.
IP address provided by a DHCP server.
2.
If no DHCP server provides the IP address, the IP address
from the Static/DHCP failure field.
3.
If the Static/DHCP failure field is empty, an IP address from
the last good saved configuration of the AT-VP504E FXO.
4.
If no IP address was previously saved in the configuration,
there is no valid IP address value.
When the Static option is checked, the AT-VP504E FXO
uses the IP address in the corresponding Static/DHCP failure
field.
Configuring IP
Addresses
The IP Configuration section sets the general IP addresses used by the
AT-VP504E FXO.
Figure 12: IP Configuration Section
The following parameters can be set:
Table 14: IP Addresses Parameters
Parameter
Definition
Local IP Address
Local IP address of the AT-VP504E FXO.
Subnet Mask
Subnet mask IP address used by the
AT-VP504E FXO. The subnet mask enables the
network administrator to further divide the host part of
the address into two or more subnets.
Default Router
Default router IP address used by the
AT-VP504E FXO. A router is a device that connects
any number of LANs.
Summary of Contents for AT-VP504E FXS
