Chapter 3 - Administration
Administration Manual (H.323 Version)
AT-VP504E FXO
44
PSTN to IP
Network Call
Settings
PSTN to IP Network call parameters allow a PSTN user to call in the
FXO port of the AT-VP504E FXO. The PSTN user gets a dial tone to
place a call on the IP network to which the AT-VP504E FXO is
connected. The following parameters can be set:
Silence Detection/
Suppression Level
The level of silence detection/suppression. A high
level can chop some part of the voice transfers.
Values: None, Low (transparent), Normal
(conservative), High (aggressive)
Note: The difference between transparent and
conservative is how "aggressive" the algorithm will
consider something as an inactive voice and how
"fast" it will stop the voice stream. A setting of
conservative is a little bit more agressive compared
to a setting of transparent to react to silence.
Default: None
Table 18: FXO Ports Telephony Settings (Continued)
Parameter
Definition
Table 19: FXO Ports PSTN to IP Network Settings
Parameter
Definition
Accept PSTN to IP
Network Calls
When the Enabled option is checked, enables the
PSTN to IP Network call parameters.
Summary of Contents for AT-VP504E FXS
