Chapter 4 - How to Use the AT-VP504E FXO
Administration Manual (H.323 Version)
AT-VP504E FXO
56
“205.237.2488”, an error tone is played.
Table 24: General Dialing Rules
Dialing Rule Priority
Description
Priority 1:
Automatic speed dial
A call coming from the PSTN is automatically
routed on the IP network. The destination of the
call is an E.164 alias or an H.323 Id alias.
•
No digit needs to be dialed in order to
activate the automatic speed dial.
Priority 2:
One digit speed dial
When dialing a particular digit, a new call is
automatically started and routed on the IP
network. The destination of the call is an E.164
alias or an H.323 ID alias.
•
The one digit speed dial must b from
[0-9, *, #].
•
The one digit speed dial must be the
first digit entered. For instance,
assuming that the one digit speed
dial is set to “9”, dialing 9 will start the
speed dialing, while dialing 192 will
not.
•
If the IP address prefix is recognized,
this rule is not applied.
Summary of Contents for AT-VP504E FXS
