Chapter 4 - How to Use the AT-VP504E FXO
Administration Manual (H.323 Version)
AT-VP504E FXO
58
Priority 4:
End of dialing character
The user dials a particular digit to indicate that
an E.164 alias is complete.
•
Valid characters are “*”, “#” or
nothing (no end of dialing character).
•
If the IP address prefix is recognized,
this rule is not applied.
•
The end of dialing character is not
part of an E.164 alias. For example,
if the end of dialing character is “*”
and the user dials “8298749*”, a new
call is started with “8298749”.
•
If the end of dialing character is “*”,
the “#” can be dialed in an E.164
alias.
•
If the end of dialing character is “#”,
the “*” can be dialed in an E.164
alias.
•
If there is no end of dialing character,
both “*” and “#” can be dialed in an
E.164 alias.
Priority 4:
Assume end of dialing
after n digits
An E.164 alias is considered complete after n
digits are dialed.
•
Any value between 1 and 20 digits.
•
Default value is 20 digits.
•
If the IP address prefix is recognized,
this rule is not applied.
Priority 4
Assume end of dialing
after n seconds
An E.164 alias is considered complete n
seconds after the last digit was dialed.
•
A value between 5 and 20 seconds.
•
Default value is 5 seconds.
•
This rule is also applied when dialing
an IP address.
Table 24: General Dialing Rules (Continued)
Dialing Rule Priority
Description
Summary of Contents for AT-VP504E FXS
