Chapter 4 - How to Use the AT-VP504E FXO
Administration Manual (H.323 Version)
AT-VP504E FXO
59
IP Address
Specific Rules
The following rules apply when dialing an IP address.
Table 25: IP Address Dialing Rules
Dialing Rule
Description
IP address prefix
See
Table 24 on page 56
.
IP address dots
The dots of an IP address are dialed using “*”.
•
This rule is applied once the IP
address prefix is recognized.
Terminating an IP
address
An IP address is terminated by dialing “*”.
Instead of dialing “*”, the user can also wait n
seconds before the IP address is considered
complete.
•
This rule is applied once the IP
address prefix is recognized.
•
n, the number of seconds, is the
value of the Assume End of Dialing
After n seconds rule (see
Table 24
on page 56
).
IP address time-out
If the IP address is not complete n seconds after
the last digit was dialed, a time-out condition
occurs. When this time-out occurs, an error tone
is played to the PSTN user.
•
This rule is applied once the IP
address start-up sequence is
recognized.
•
n, the number of seconds, is the
value of the Assume end of dialing
after n seconds rule (see
Table 24 on
page 56
).
•
For example: the IP address start-up
sequence is “**” and the Assume end
of dialing after n seconds rule is set
to 5 seconds. The user dials “**205”
and then waits. 5 seconds later, a
time-out occurs and the error tone is
played.
Summary of Contents for AT-VP504E FXS
