Appendix A - DHCP Server Vendor Specific Information
Administration Manual (H.323 Version)
AT-VP504E FXO
76
Entering IP Addresses
There are two formats of address string:
Long: Has a size of 6 hexadecimal characters and
includes the IP address and port.
Short: Has a size of 4 hexadecimal characters and
includes only the IP address. In this case, the default port
is used.
If the DHCP request fails or the address is not in the vendor specific
codes, the following applies:
1.
If the DHCP value already in the configuration is valid, it is
kept.
2.
If not, the static value is used if valid.
3.
If not, the default value is used.
Example
The following example shows how to enter the Syslog IP address
192.168.0.10 (with the default port used) and the same address at port
2545. The Vendor Specific Code is 110. The format is in hexadecimal.
Standard gatekeeper
111
Software server
117
Emergency Primary software server
118
Emergency Secondary software server
119
Table 29: Vendor Specific Codes (Continued)
Item of Information
Vendor Specific Code
Table 30: Address String Formats
Variable
Valid Range
Typical Value
Note
IP Address
Any valid IP
address
192.168.0.2
N/A
Port
1 - 32,768
162
Not present in the format
with dimension 4.
Summary of Contents for AT-VP504E FXS
