Specifications
15
S-Mount Lenses User Guide V1.1.0
S-6-F1.8-5MP-T1-2.5
Lens position at infinity (approximately)
defines values for the position of the lens when focused to infinity. We
recommend using a minimum thread engagement length of 1.0 mm (two 360
degree turns). Below this length, lens mounting is not stable enough.
Feature
S-6-F1.8-5MP-T1-2.5
S-6-F1.8-5MP-T1-2.5-IRC
Product code
12342
12343
Camera mount
S-Mount (M12 × 0.5)
Sensor size
Type 1/2.5
Focal length
6 mm
Aperture (f/#)
f/1.8
Supported pixel resolution
5 megapixels
Angle of view (diagonal)
61.5° with Type 1/2.5
Back focus
9.6 mm
IR correction type
IR-optimized
IR cut
Relative illumination
>64%
Distortion
<-12%
Dimensions (diameter × length)
Ø 14 mm × 18.8 mm
Ø 14 mm × 18.6 mm
Mass
<10 g
Table 10: S-6-F1.8-5MP-T1-2.5 specifications
ID
Component or distance type
IR-optimized
IR cut
1
Electronics component
-
2
Sensor with cover glass
-
a
Lens front to sensor
1
distance
26.2 mm
b
Lens front to front flange distance
13.6 mm
13.4 mm
c
Flange focal distance (optical)
1
12.6 mm
d
Thread engagement length
2.7 mm
e
Lens back to sensor distance
8.4 mm
f
Lens thread end to sensor
1
distance
9.9 mm
1
Optical distance measured to the active sensor surface,
disregarding microlenses and cover glass.
Table 11: S-6-F1.8-5MP-T1-2.5 lens position at infinity (with schematic drawing)
a
1
2
c
b
d
e
f
Lens