Camera interfaces
185
Alvium CSI-2 Cameras User Guide V2.6.2
Status LED
Alvium CSI-2 cameras have a green status LED. The following table describes the
flashing pattern indicating different events. Inverse flashing: If the LED is already
on, it is switched off for a short time.
Normal operation
Error conditions
Four short flashes followed by another sequence indicate errors. In this case, try
the following to get the camera back to normal operation:
1. Restart the camera.
2. If the LED again indicates error state after restart, please visit
www.alliedvision.com/en/support
LED codes
Behavior
Status
Continuously active
Power on or idle state
Irregular flashing
Command or image traffic,
such as for camera startup
Four short flashes and
code sequence
Error state
Table 92: LED codes for normal operation