Specifications
50
Alvium CSI-2 Cameras User Guide V2.6.2
Typical operation
•
Factory settings (camera after startup)
•
Minimum exposure time
•
Full resolution
•
RAW8 (GREY) pixel format
•
Camera operation in freerun mode
•
Sensor readout using ADC bit depth
•
Without bandwidth limitations.
Achieved values for your system may not match specified values
Values stated in this chapter show the available frame rates on an ideal system,
supporting a bandwidth of 1.051 Gbps per lane. Your individual setup may affect
available values such as for:
•
Minimum
exposure times
•
Maximum
frame rates
, including ROI frame rates
•
Image resolution steps
. Depending on the available increments, some
standard resolutions are not supported. For example, instead of 1,440 × 900
pixels for WXGA+, 1,440 × 904 pixels are available.
•
Minimum resolution
. Depending on the embedded board, minimum
resolution may be greater than stated in tables. For example, instead of
16 × 16 pixels, the minimum resolution available may be 256 × 32 pixels.
Interdependencies between ROI and Exposure Time values
Changing parameters for ROI can affect values for Exposure Time, such as
minimum, maximum, and increments, but Exposure Time itself as well.
We recommend you to
set ROI values before you set values for Exposure Time
.
See
Value changes by control interdependencies
on page 194 for details.
Delays
For delays, see