Compliance, safety, and intended use
34
Alvium CSI-2 Cameras User Guide V2.6.2
Compliance notifications
National regulations on disposal must be followed.
Bare board and open housing cameras
Bare board and open housing cameras are designed for integration and are
delivered without closed housing on customer's request. Housing design is critical
for electromagnetic compatibility (EMC) of the camera.
Avoid electromagnetic interferences
Interface cables, power cables, and I/O cables are sensitive to electromagnetic
interference.
•
Use shielded cables only.
•
We recommend using cables offered by Allied Vision.
•
Avoid coiling.
•
We recommend using GPIOs only in environments with low electromagnetic
interference.
Moreover, avoid unnecessary bending to prevent damaging the cables.
Requirements for EMC housings
See the Electromagnetic Compatibility for Open Housing Alvium Cameras
application note at
www.alliedvision.com/en/support/technical-documentation/
alvium-csi-2-documentation.
i