Compliance, safety, and intended use
38
Alvium CSI-2 Cameras User Guide V2.6.2
Product safety
To prevent material damage, read the following and understand how to safely
handle and operate the camera.
Embedded systems
Setup and operation of Alvium CSI-2 cameras in embedded systems is different
than for cameras in PC-based systems. Components can easily be damaged.
If you are unfamiliar with embedded systems, be extremely careful. Follow the
instructions in
Supported embedded boards
We have tested that Alvium CSI-2 cameras can be operated properly with the
referenced embedded boards. For information on using these components safely,
please see the documentation provided by the manufacturers of the embedded
boards.
Electrical connections
The MIPI CSI-2 standard does not specify electrical connections as extensively as
the USB or GigE standard. Read specifications carefully.
Allied Vision accessories help to avoid damage to the camera and connected
components. See the Alvium Cameras Accessory Guide for suitable accessories.
See
Alvium CSI-2 cameras are not protected against damage caused by reverse polarity.
•
For specifications, see
•
For instructions to avoid electronics damage, see
ESD
ESD is dangerous for electronic devices, especially when tools or hands get in
contact with connectors and electronic components. We recommend measures to
avoid damage by ESD:
•
Unpacking: Remove the camera from its anti-static packaging only when your
body is grounded.
•
Workplace: Use a static-safe workplace with static-dissipative mat and air
ionization.
•
Wrist strap: Wear a static-dissipative wrist strap to ground your body.
•
Clothing: Wear ESD clothing. Keep components away from your body and
clothing. Even if you are wearing a wrist strap, your body is grounded but your
clothes are not.
