167
Alvium USB Cameras User Guide V3.6.4
Specifications
User sets
Supported features
UserSet
features enable to store individual settings on Alvium USB cameras. These
user sets can be loaded by default, without needing to set values by software after
every restart of the camera. Or they can be used to switch between different
settings, for example, to adjust from daylight to artificial light.
User sets on Alvium USB cameras support all features except for:
• Selectors
• Command features
• Read-only features
• Features that do not apply to the corresponding interface, such as CSI-2
related features on a USB camera
• Features in the
LUTControl
category.
Trigger features and UserSetDefault
Trigger features are reset to default values when the default user set is loaded.
• Column
UserSetLoad
displays how user values are affected when the
command for
UserSetLoad
is executed.
• Column
DeviceReset
displays how user values are affected when the
command for
DeviceReset
is executed.
Feature
Default value
UserSetDefault DeviceReset
TriggerActivation
RisingEdge
Default value
Default value
TriggerMode
Off
Default value
Default value
TriggerSelector
AcquisitionStart
User value
Default value
TriggerSoftware
[Command]
Not applicable
Not applicable
TriggerSource
Software
Default value
Default value
Table 74: Trigger features being reset
