216
Alvium USB Cameras User Guide V3.6.4
Performance and troubleshooting
Feature value changes during streaming
Only some features can be adjusted while the camera is streaming, these include:
This list is not complete and will be updated in future document versions.
Value changes by feature interdependencies
The conversion between time and clock cycles affects control values. Features for
pixel format, bandwidth, ROI, exposure time, and triggering are related to each
other. Changing values for one feature can change values for another feature. For
example, frame rates can be reduced when
PixelFormat
is changed subsequently.
Figure 89
shows the interdependencies.
AcquisitionFrameRate
ExposureAuto
GainAuto
BalanceWhiteAuto
ExposureTime
OffsetX
BlackLevel
Gain
OffsetY
Latencies
Consider that value changes become effective with latencies based on the sensor
and its operation mode (triggered or free run, shutter mode, frame rate).
Figure 89: Interdependencies between features
Set First
Set Last
PixelFormat
DeviceLinkThrougputLimit
ROI Se
ƫ
ngs
ReverseX/Y
Binning Se
ƫ
ngs
SensorBitDepth
BlackLevel
May interact
Acquisi
Ɵ
onFrameRate
ExposureTime
Acquisi
Ɵ
onFrameRate
ExposureTime