233
Alvium USB Cameras User Guide V3.6.4
Performance and troubleshooting
Radio signal interference
How can I avoid radio signal interference from wireless devices?
Ensure camera installation complies with
Electromagnetic Compatibility
.
Wireless devices and USB 3.0 or 3.1 Gen 1 commonly use 2.4 GHz frequency
(WLAN includes 2.4, 3.6, and 4.9 GHz).
Even USB 3.0 and 3.1 Gen 1 cables can interfere harmfully with other
electromagnetic devices. For example, despite shielding, a USB 3.0 or 3.1 Gen 1
cable can interfere with a wireless mouse. Tests have shown an increase of the
noise floor up to 20 dB for the affected devices.
• To enable maximum bandwidth, 2.4 GHz radio frequencies must be avoided;
therefore, use
maximum shielded cables only
.
• Keep
maximum distance
between your Alvium USB camera setup and
interfering devices.
• Use
high-gain antennas
to reduce power of the radio signals.
For tested USB accessories, see the Alvium Cameras Accessory Guide at
www.alliedvision.com/en/support/technical-documentation/
.
