Camera Link registers
70
Goldeye Camera Link Register Controls Reference V1.0.0
RegLineOutSource
Signal source of the
LineOut
that is specified by the selected address.
For detailed information see the camera waveform diagrams provided in the
Goldeye G/CL Technical Manuals.
Register name
RegLineOutSource
Register type
Array of MaskedIntReg
Access mode
R/W
Address
0x00015144 for LineOut1
0x0001514C for LineOut2
0x00015154 for LineOut3
Length (Bytes)
4
Default
Exposing
Bits used
31 .. 1
Enumeration values:
Value
Name and description
0
GPO
General purpose output
1
AcquisitionTriggerReady
Active once the camera has been recognized by the host computer and
is ready to start acquisition
2
FrameTriggerReady
Active when the camera is in a state that will accept the next frame
trigger
4
Exposing
Active for the duration of sensor exposure
5
FrameReadout
Active during frame readout, i.e. the transferring of image data from
the sensor to camera memory
6
Imaging
Active when the camera is exposing or reading out frame data
7
Acquiring
Active when acquisition start has been initiated
8
LineIn1
Active when there is an external trigger at Line1
9
LineIn2
Active when there is an external trigger at Line2
Table 16: RegLineOutSource | Values and description (sheet 1 of 2)
