Camera Link registers
88
Goldeye Camera Link Register Controls Reference V1.0.0
RegBCIntegrationAbort, RegBCIntegrationStart
BCIntegrationAbort
aborts a running integration as soon as possible. The
correction buffer will be invalid if lesser number of frames have been integrated
than requested.
BCIntegrationStart
starts the integration of
BCIntegrationFrameCount
frames, depending on
BCIntegrationMode
. This command does not control the
triggering of images for the integration, it only enables the integration process.
Background correction will wait after
BCIntegrationStart
, until
BCIntegrationFrameCount
frames have been produced by the camera. Frame
triggering is not in the background correction domain. This is controlled by
functionalities such as
ExposureTime
,
AcquisitionStart
,
AcquisitionStop
,
TriggerSource
,
TriggerSelector
, or
AcquisitionFrameRate
.
If the camera does not output images for some reason, background correction
integration will stall until AcquisitionStart is executed and frame triggering is
allowed by the trigger setup.
For optimal correction results:
1. Configure the settings you intend to use for your application.
2. Integrate a fresh background correction image without light (dark image) using
these settings.
3. Finally, apply the background correction.
