Compliance and intended use
23
Prosilica GT Technical Manual V3.2.0
Camera applications and intended use
General use
•
The user is responsible for operating the camera within the specifications that
are defined in this document, and within appropriate environmental
conditions and technical prerequisites, to ensure trouble-free camera
operation.
•
The camera is compliant with current data communication standards;
however, those standards do not allow for self-monitoring. Thus, the camera
cannot be used as a standalone device for security-related monitoring
operations.
•
The camera is a hardware product. Only when used with appropriate
accompanying software, the camera produces the desired results. The
realization of intelligent solutions requires additional software that is suitable
to run with the camera.
•
The camera is a component, it is neither a complete product, nor is it a
ready-made technical solution.
•
The camera-supporting software can be obtained and installed separately
from the camera. Usage of the software is solely the responsibility of the user.
•
The camera must not be opened. For all repair tasks, contact Allied Vision or
one of Allied Vision's authorized representatives.
•
Observe the intended use. The camera must only be used for purposes that
are in conformity with the stated intended use.
•
Additionally, refer to the warranty information on the Allied Vision website.
•
For usage in product with specific safety requirements a Quality Assurance
Agreement with Allied Vision is required.
•
The camera is intended for use in a commercial, industrial, or business
environment. The test phase and programming should be carried out by
advanced users.
Use in medical devices
The camera provides basic adequacy to be used in medical devices as well,
however, is not specially designated for operation in medical devices. When used
as part of a medical device, a review of the specific application is necessary. For
usage in medical product, a Quality Assurance Agreement with Allied Vision is
required. Users who integrate the camera into an application must comply with the
rules and regulations concerning medical devices.
