Guppy PRO Technical Manual
V4.1.2
114
Binning and sub-sampling access (Guppy PRO F-503B, F-503C,
and monochrome CCD models)
The binning and sub-sampling modes described in the last two chapters are
only available as pure binning or pure sub-sampling modes. A combination of
both is not possible.
As you can see there is a vast amount of possible combinations. But the
number of available Format_7 modes is limited and lower than the possible
combinations.
Thus access to the binning and sub-sampling modes is implemented in the
following way:
•
Format_7 Mode_0
is fixed and cannot be changed
•
A maximum of 7 individual Allied Vision modes can be mapped to
Format_7 Mode_1
to
Mode_7
•
Mappings can be stored via register (see
on page 236) and are uploaded automatically into the
camera on camera reset.
•
The
default settings
(per factory) in the Format_7 modes are listed in the
following table
Figure 57: 2 out of 8 H+V sub-sampling (color)
Format_7
Monochrome CCD models
Guppy PRO color
Mode_0
full resolution, no binning,
no sub-sampling
full resolution, no sub-sampling, no binning
Mode_1
2 ×
horizontal
binning
2 ×
horizontal
binning
Mode_2
2 ×
vertical
binning
2 ×
vertical
binning
Table 53: Default Format_7 binning and sub-sampling modes (factory setting)
2 out of 8 H+V sub-sampling
