Guppy PRO Technical Manual
V4.1.2
125
Trigger modes
Guppy PRO cameras support IIDC conforming Trigger_Mode_0 and
Trigger_Mode_1 and special Trigger_Mode_15 (bulk trigger).
Note
CMOS cameras Guppy PRO F-503 support only
Trigger_Mode_0.
Trigger mode
also known as
Description
Trigger_Mode_0
Edge mode
Sets the shutter time according to the value set in the shutter
(or extended shutter) register
Trigger_Mode_1
Level mode
Sets the shutter time according to the active low time of the
pulse applied (or active high time in the case of an inverting
input)
Trigger_Mode_15 Programmable
mode
Is a bulk trigger, combining one external trigger event with
continuous or one-shot or multi-shot internal trigger
Table 57: Trigger modes