Guppy PRO Technical Manual
V4.1.2
184
Example
This requires, for example, that to enable ISO_Enabled mode (see chapter
on page 142), (bit 0 in register 614h), the value
80000000 h must be written in the corresponding register.
Figure 83: Enabling ISO_Enable
Table 102: Configuring the camera (Guppy PRO F-146B)
Offset of Register: (0x0F00614)
ISO_Enable
Write 80000000 and click
Write
Content of register: 80000000
= 1000 0000 0000 0000 0000 0000 0000 0000
Content of register: FA838583
= 1111 1010 1000 0011 1000 0101 1000 0011
Offset of Register: (0xF1000040)
ADV_FNC_INQ
