Guppy PRO Technical Manual
V4.1.2
206
Status and control registers for camera
Inquiry register for absolute value CSR offset address
Register
Name
Field
Bit
Description
600h
CUR-V-Frm_RATE/
Revision
Bit [0 to 2] for the frame rate
604h
CUR-V-MODE
Bit [0 to 2] for the current video mode
608h
CUR-V-FORMAT
Bit [0 to 2] for the current video format
60Ch
ISO-Channel
Bit [0 to 3] for channel, [6..7] for ISO speed
610h
Camera_Power
Always 0
614h
ISO_EN/
Continuous_Shot
Bit 0: 1 for start continuous shot; 0 for stop continuous shot
618h
Memory_Save
Always 0
61Ch
One_Shot, Multi_Shot,
Count Number
620h
Mem_Save_Ch
Always 0
624
Cur_Mem_Ch
Always 0
628h
Vmode_Error_Status
Error in combination of Format/Mode/ISO Speed:
Bit(0): No error; Bit(0)=1: error
62Ch
Software_Trigger
Software trigger
Write:
0: Reset software trigger
1: Set software trigger (self-cleared, when using edge mode;
must be set back to 0 manually, when using level mode)
Read:
0: Ready (meaning: it’s possible to set a software trigger)
1: Busy (meaning: no trigger possible)
Table 116: Status and control registers for camera
Offset
Name
Description
700h
ABS_CSR_HI_INQ_0
Always 0
704h
ABS_CSR_HI_INQ_1
Always 0
708h
ABS_CSR_HI_INQ_2
Always 0
70Ch
ABS_CSR_HI_INQ_3
Always 0
Table 117: Absolute value inquiry register
