Guppy PRO Technical Manual
V4.1.2
227
Input/output pin control
Delayed Integration Enable (IntEna)
A delay time between initiating exposure on the sensor and the activation edge
of the IntEna signal can be set using this register. The on/off flag activates/
deactivates integration delay. The time can be set in µs in DelayTime.
0xF10002A0 DPC_INFO Presence_Inq
[0]
Indicates presence of this feature (read only)
---
[1 to 3]
Reserved
MinThreshold [4 to 10] Minimum value for threshold
MaxThreshold [11 to 17] Maximum value for threshold
MaxSize
[18 to 31] Maximum size of defect pixel data
Note
•
See chapter
•
See chapter
•
See chapter
•
See chapter
Note
•
Only one edge is delayed.
•
If IntEna_Out is used to control an exposure, it is possible
to have a variation in brightness or to precisely time a
flash.
Register
Name
Field
Bit
Description
Table 132: Advanced register: Defect pixel correction (continued)