Guppy PRO Technical Manual
V4.1.2
233
Mirror image
The table below illustrates the advanced register for Mirror image. Mirror
image is only possible with Guppy PRO F-503.
•
With Guppy PRO F-503B, horizontal and vertical mirror is possible.
•
With Guppy PRO F-503C, only horizontal mirror is possible.
Soft reset
The soft reset feature is similar to the INITIALIZE register, with the following
differences:
•
1 or more bus resets will occur
•
The FPGA will be rebooted
The reset can be delayed by setting the Delay to a value unequal to 0.
The delay is defined in 10 ms steps.
Register
Name
Field
Bit
Description
0xF1000410 MIRROR_IMAGE
Presence_Inq
[0]
Indicates presence of this
feature (read only)
---
[1 to 5]
Reserved
ON_OFF
[6]
Mirror image on/off
1: on
0: off
Default: off
---
[7 to 31]
Reserved
Table 139: Advanced register: Mirror
Register
Name
Field
Bit
Description
0xF1000510 SOFT_RESET
Presence_Inq
[0]
Indicates presence of this
feature (read only)
---
[1 to 5]
Reserved
Reset
[6]
Initiate reset
---
[7 to 19]
Reserved
Delay
[20 to 31]
Delay reset in 10 ms steps
Table 140: Advanced register: Soft reset