Guppy PRO Technical Manual
V4.1.2
61
Adjustment of C-Mount/CS-Mount
The dimensional adjustment cannot be made by the customer. All adjustments
have to be made by the Allied Vision factory.
Adjustment is only made (via adjustment spacer between lens and front
flange), if the customer needs accuracy below 100 µm.
If you need any adjustments, please contact Customer Care: For phone
numbers and e-mail: See
Note
For all customers who know the C-Mount adjustment
procedure from Pike cameras:
The front flange of Guppy PRO cameras is a fixed part of the
camera (and cannot be screwed).
As mentioned above: adjustment of C-Mount with Guppy PRO
cameras can only be made by Allied Vision.
