Guppy PRO Technical Manual
V4.1.2
10
Introduction
This Guppy PRO Technical Manual describes in depth the technical
specifications, dimensions, all camera features (IIDC standard and Allied Vision
smart features) and their registers, trigger features, all video and color
formats, bandwidth and frame rate calculation.
For information on hardware installation, safety warnings, pin assignments on
I/O connectors and IEEE1394b connectors read the
1394 Installation Manual
.
Document history
Note
Please read through this manual carefully
We assume that you have read already the
1394 Installation
Manual
(go to
https://www.alliedvision.com/en/support/
) and that you have installed the
hardware and software on your PC or laptop (FireWire card,
cables).
Version
Date
Remarks
V2.0.1
2010-Nov-30
New Manual — Release status
V2.0.2
2011-Apr-05
•
Revised video formats of Guppy PRO F-503,
Format_7 default modes Guppy PRO F-503B, F-503C
•
Added exposure time offset for Guppy PRO F-503,
Model-specific exposure time offset
•
Added On request: power out 6 W (Hirose) in all specification
tables: see
•
Revised advanced register: input control (only one input) in
Table 23: Advanced register: Input control
•
Revised IO_INP_CTRL: ID 0x3..0x1F is Reserved in
•
Revised advanced register: output control (3 outputs) in
29: Advanced register: Output control
•
At register 0xF1000200 changed width and height: see
126: Advanced register: Maximum resolution inquiry
•
YUV8: deleted description of data type straight binary:
40: Data structure of YUV8; Source: IIDC V1.31
to be continued on next page
Table 1: Document history
