Guppy PRO Technical Manual
V4.1.2
181
Example formula for the monochrome camera
Mono16, 1392 × 1040, 30 fps desired
Test images
Loading test images
Test images for monochrome models
Guppy PRO monochrome cameras have two test images that look the same.
Both images show a gray bar running diagonally (mirrored at the middle axis).
•
Image 1 is static.
•
Image 2 moves upwards by 1 pixel/frame.
Formula 20: Example maximum frame rate calculation
FirePackage
Fire4Linux
1. Start SmartView.
2. Click the Edit settings button.
3. Click Adv1 tab.
4. In combo box Test images choose
Image 1 or another test image.
1. Start cc1394 viewer.
2. In Adjustments menu click on
Picture Control.
3. Click Main tab.
4. Activate Test image check box on.
5. In combo box Test images choose
Image 1 or another test image.
Table 100: Loading test images in different viewers
Figure 80: gray bar test image
BYTE_PER_PACKET
30
1392
1040
2
125μs
10856
8192
=
=
frame
rate
reachable
8192
1392
1040
2
125μs
------------------------------------------------------------
22.64
=
