Guppy PRO Technical Manual
V4.1.2
208
Offset Name
Field
Bit
Description
800h
BRIGHTNESS
Presence_In
q
[0]
Presence of this feature
0: N/A
1: Available
Abs_Control [1]
Absolute value control
0: Control with value in the Value field
1: Control with value in the Absolute
value CSR
If this bit = 1, value in the Value field
is ignored.
---
[2 to 4]
Reserved
One_Push
[5]
Write 1: begin to work (self-cleared
after operation)
Read: Value=1 in operation
Value=0 not in operation
If A_M_Mode =1, this bit is ignored.
ON_OFF
[6]
Write: ON or OFF this feature
Read: read a status
0: OFF, 1: ON
If this bit =0, other fields will be read
only.
A_M_Mode
[7]
Write: set the mode
Read: read a current mode
0: Manual
1: Auto
---
[8 to 19] Reserved
Value
[20 to 31] Value.
Write the value in auto mode, this
field is ignored.
If ReadOut capability is not available,
read value has no meaning.
804h
AUTO-EXPOSURE
See above
Note: Target gray level parameter in
SmartView corresponds to
Auto_exposure register 0xF0F00804
(IIDC).
Table 118: Feature control register