Guppy PRO Technical Manual
V4.1.2
232
For an explanation of the color correction matrix and for further information
read chapter
Trigger delay
The advanced register allows start of the integration to be delayed via
DelayTime by max. 2
21
µs, which is max. 2.1 s after a trigger edge was
detected.
0xF10003A4 COLOR_CORR_COEFFIC11 = Crr
[0 to 31] A number of 1000 equals a
color correction coefficient
of 1.
Color correction values
range -1000..+2000 and are
signed 32 bit.
In order for white balance to
work properly ensure that
the row sum equals to 1000.
The maximum row sum is
limited to 2000.
0xF10003A8 COLOR_CORR_COEFFIC12 = Cgr
[0 to 31]
0xF10003AC COLOR_CORR_COEFFIC13 = Cbr
[0 to 31]
0xF10003B0 COLOR_CORR_COEFFIC21 = Crg
[0 to 31]
0xF10003B4 COLOR_CORR_COEFFIC22 = Cgg
[0 to 31]
0xF10003B8 COLOR_CORR_COEFFIC23 = Cbg
[0 to 31]
0xF10003BC COLOR_CORR_COEFFIC31 = Crb
[0 to 31]
0xF10003C0 COLOR_CORR_COEFFIC32 = Cgb
[0 to 31]
0xF10003C4 COLOR_CORR_COEFFIC33 = Cbb
[0 to 31]
0xF10003A4
to
0xF10003FC
Reserved for
testing purposes
Do not touch!
Register
Name
Field
Bit
Description
0xF1000400 TRIGGER_DELAY
Presence_Inq
[0]
Indicates presence of this
feature (read only)
---
[1 to 5]
Reserved
ON_OFF
[6]
Trigger delay on/off
---
[7 to 10]
Reserved
DelayTime
[11 to 31]
Delay time in µs
Table 138: Advanced register: Trigger delay
Note
Trigger delay works with external trigger modes only.
Register
Name
Field
Bit
Description
Table 137: Advanced register: Color correction (continued)
