Guppy PRO Technical Manual
V4.1.2
238
The camera does not show the status indicators during normal operation:
Examples:
•
Power on
is not shown.
•
Isochronous traffic
is not shown.
•
Asynchronous traffic
is not shown.
User profiles
Definition
Within the IIDC specification user profiles are called memory channels. Often
they are called user sets. In fact these are different expressions for the
following: storing camera settings into a non-volatile memory inside the
camera.
User profiles can be programmed with the following advanced feature register.
Register
Name
Field
Bit
Description
0xF1000640 SWFEATURE_CTRL Presence_Inq [0]
Indicates presence of this feature (read
only)
BlankLED_Inq [1]
Indicates presence of
Disable LEDs
feature.
---
[2 to 15] Reserved
---
[16]
Reserved
BlankLED
[17]
0: Behavior as described in chapter
1: Disable LEDs. (Only error codes are
shown.)
---
[18 to 31] Reserved
Table 145: Advanced register: Software feature control (disable LEDs)
Note
During the startup of the camera and if an error condition is
present, the LEDs behave as described in Chapter Status LEDs
on page 93ff.
