Guppy PRO Technical Manual
V4.1.2
33
Specifications
Guppy PRO F-031B, F-031C
Note
•
For information on bit/pixel and byte/pixel for each color
mode see
•
Maximum protrusion means the distance from lens
flange to the glass filter in the camera.
Feature
Specification
Sensor
Sony ICX618AL/AQA with EXview HAD microlens
CCD, progressive scan
Type 1/4 (4.5 mm diagonal)
Effective chip size
3.6 mm × 2.7 mm
Cell size
5.6 µm × 5.6 µm
Picture size (max.)
656 × 492 pixels (Format_7 Mode_0)
Lens mount
Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
Maximum protrusion: 10.1 mm (see
)
ADC
14-bit
Color modes
Guppy PRO F-031C: Raw8, Raw12, Raw16, Mono8, YUV411, YUV422, RGB8
Frame rates
1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps; 120 fps
Up to 123 fps in Format_7
Gain control
Manual: 0 to 24.4 dB (0.0359 dB/step); auto gain (select. AOI)
Shutter speed
75 µs to 67,108,864 µs (~ 67 s); auto shutter (select. AOI)
External trigger shutter Programmable, trigger level control, single trigger, bulk trigger, programmable trig-
ger delay
Look-up tables
User-programmable (12-bit
10-bit); default gamma (0.45)
Smart functions
Auto gain control (AGC), auto exposure control (AEC), autofunction AOI, look-up
table (LUT), 1 storable user set
Guppy PRO F-031B: Binning, sub-sampling
Guppy PRO F-031C: Auto white balance (AWB), color correction, hue, saturation
I/Os
1 configurable input (optocoupled), 3 configurable outputs (optocoupled)
Transfer rate
100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Digital interface
IEEE1394b (IIDC V1.31), 1 × copper connector
Power requirements
DC 8 V to 36 V via IEEE1394 cable or 12-pin Hirose
Power consumption
Typical
3.5 watt @ 12 VDC
(full resolution and maximum frame rate)
Table 7: Guppy PRO F-031B, F-031C model specifications
