Guppy PRO Technical Manual
V4.1.2
66
Camera interfaces
This chapter gives you detailed information on status LEDs, inputs and outputs,
trigger features and transmission of data packets.
IEEE1394b port pin assignment
The IEEE1394b connector is designed for industrial use and has the following
pin assignment as per specification:
Note
For a detailed description of the camera interfaces (FireWire,
I/O connector), and operating instructions see the
1394
Installation Manual
, Chapter
Camera interfaces
.
Read all Notes and Cautions in the
1394 Installation Manual
,
before using any interfaces.
Figure 25: IEEE1394b connector
Note
IEEE1394b connectors with screw lock mechanism provide
access to the IEEE1394 bus and thus makes it possible to
control the camera and output frames.
www
For more information on cables and on ordering cables online
(by clicking the article and sending an inquiry) go to:
https://www.alliedvision.com/en/contact
1
2
3
4
5
6 7
8
9
Pin
Signal
1
TPB-
2
TPB+
3
TPA-
4
TPA+
5
TPA (Reference ground)
6
VG (GND)
7
N.C.
8
VP (Power, VCC)
9
TPB (Reference ground)
