Guppy PRO Technical Manual
V4.1.2
96
Mirror function (Guppy PRO F-503B, F-503C)
Guppy PRO F-503 models are equipped with a mirror function, which is built
directly into the sensor. The mirror is centered to the current FOV center and
can be combined with all image manipulation functions, like
binning
.
This function is especially useful when the camera is looking at objects with the
help of a mirror or in certain microscopy applications.
•
With Guppy PRO F-503B, horizontal and vertical mirror is possible.
•
With Guppy PRO F-503C, only horizontal mirror is possible.
Register
Name
Field
Bit
Description
0xF0F00800
BRIGHTNESS
Presence_Inq
[0]
Presence of this feature:
0: N/A
1: Available
Abs_Control
[1]
Absolute value control
O: Control with value in the value field
1: Control with value in the absolute value
CSR
If this bit= 1 the value in the value field
has to be ignored
---
[2 to 4]
Reserved
One_Push
[5]
Write: Set bit high to start
Read: Status of the feature:
Bit high: WIP
Bit low: Ready
ON_OFF
[6]
Write: ON or OFF this feature
Read: read a status
0: OFF
1: ON
A_M_MODE
[7]
Write: set mode
Read: read current mode
0: MANUAL
1: AUTO
---
[8 to 19]
Reserved
Value
[20 to 31]
Read/Write Value; this field is ignored
when writing the value in Auto or OFF
mode; if readout capability is not
available reading this field has no
meaning.
Table 49: CSR: Brightness
