Mako Technical Manual
V3.0.0
16
Specifications
Specifications
Mako G-030B/C
Caution
Before operating any Allied Vision camera, read the
safety
instructions
and
ESD warnings
in the
GigE Installation
Guide.
http://www.alliedvisiontec.com/emea/support/downloads/
product-literature/hardware-installation-guide.html
Caution
Due to the small packaging and high speed of Mako cameras,
take care to ensure that the
housing temperature of the cam-
era does not exceed 45 °C
. The following are general guide-
lines for heat dissipation:
•
Mount the camera on a heat sink such as a metal bracket.
•
Lenses, when attached to a camera, act as a heat-sink and
help reduce housing temperature.
•
Ensure sufficient air flow. Use a fan if necessary.
Note
All measurements were done without protection glass /
without filter.
The uncertainty in measurement of the quantum efficiency
values is
10%.
This is due to:
•
Manufacturing tolerance of the sensor.
•
Uncertainties in the measuring apparatus itself
(Ulbricht sphere, optometer, etc.).
Feature
Specification
Resolution
644 x 484
Sensor
CMV300-3E7M1WP (mono) / CMV300-3E7C1WP (color)
Type
CMOS Progressive
Sensor size
Type 1/3
Cell size
7.4 μm
Lens mount
C / CS-Mount
Max frame rate at full resolution 309 fps
Max image bit depth
12 bit
Table 3: Mako G-030B/C camera specifications