Mako Technical Manual
V3.0.0
44
Camera interfaces
Camera interfaces
This chapter describes the Gigabit Ethernet port, inputs and outputs, and trig-
ger features.
Status LEDs
The tables below describe the status LEDs of Mako cameras.
Note
Read all
Notes
and
Cautions
in the
GigE Installation Manual
before using any interfaces.
www
For accessories like cables see:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
Figure 32: Example: Rear view of
Mako
camera
LED1 color
Status
Solid orange
Ethernet link established
Flashing orange
Network traffic
Table 22: Status LED
(orange)
LED2 color
Status
Solid green
Camera powered
Slow flashing green
Booting routine
Four rapid flashes per second Transmission error.
Contact
support@alliedvision.com
Table 23: Status LED
(green)
Status LEDs
LED1 (orange)
8-pin camera
LED2 (green)
I/O connector
(+ ext. power)