Mako Technical Manual
V3.0.0
9
Introduction
Before operation
Target group
This
Technical Manual
is the guide to detailed technical information of the
camera and
is written for experts
.
Getting started
For a quick guide on how to get started, read the
GigE Installation Guide
first.
Heat dissipation
Due to the small packaging and high speed of Mako cameras, take care to ensure
that the housing temperature of the camera does not exceed 45 °C. The follow-
ing are general guidelines for heat dissipation:
•
Mount the camera on a heat sink such as a metal bracket.
•
Lenses, when attached to a camera, act as a heat-sink and help reduce
housing temperature.
•
Ensure sufficient air flow. Use a fan if necessary.
www
To
download the GigE Installation Guide
and
GigE Camera
and Driver Features
, go to:
http://www.alliedvisiontec.com/emea/support/downloads/
product-literature.html
www
Software packages
(including
documentation
and
release
notes
) provided by Allied Vision can be downloaded from:
http://www.alliedvisiontec.com/emea/products/
software.html
Caution
Before operating any Allied Vision camera, read the
safety
instructions
and
ESD warnings
in the
GigE Installation
Guide
.
Note
Housing temperature of the camera will increase during
power-up and initial operation. This temperature will
later stabilize.