Installing the camera
70
Mako U Technical Manual V1.1.3
Installing the camera driver with Windows
tools
As alternative practice, you can install the Vimba driver manually. Check for
connected USB 3.0 devices on your Windows system.
Under Windows, the
Device Manager
provides an overview of USB 3.0 resources
and connected devices. As long as the Allied Vision USB 3.0 device driver is not
installed, the camera is not recognized.
1. Right-click the unrecognized
USB3 Vision Device
.
Screenshots are examples
The following screenshots were taken on a test system. The view may be different,
depending on the configuration of your system.
Figure 22: Windows Device Manager, Unrecognized USB3 Vision camera
No USB3 Vision Device displayed
If no
USB3 Vision Device
is displayed under
Other devices
, look at the section
Universal Serial Bus controllers
. Disable the new found
USB Composite Device
and
enable it again. This creates the
Other Devices
entry shown in Figure 16.
Figure 23: Windows Device Manager, Windows Driver Installer
