Specifications
30
Mako U Technical Manual V1.1.3
Mako U-029B specifications
Camera characteristics
See
Mako U-029B/051B/130B characteristics
Feature
Specification
Sensor
Sensor details
1/4” (diag. 3.8 mm) progressive scan CMOS ON Semiconductor PYTHON 300,
global shutter
Effective chip size
3.04 x 2.28 mm
Cell size
4.8 x 4.8 µm
Resolution (H x V)
640 x 480
ADC
10-bit
Pixel formats
Mono8, Mono10p
Camera controls
Frame rate
Up to 550 fps @ full resolution, Mono8
AcquisitionFrameRate
1 frame per hour to 550 fps (increments equal sensor cycle time)
Exposure time
44.2 µs to 1.4 s
Gain control
0 to 20 dB (0.1 dB/increment)
Frame memory
128 MByte, up to 436 frames @ full resolution, Mono8
User data memory
1 MByte
Trigger ExposureMode types
Timed, TriggerWidth
Trigger latency
25 to 38 µs (TTL GPIOs as input)
27 to 41 µs (opto-isolated input, new camera, triggered on the rising edge)
TriggerDelay
0 to 59.6 s (0.013 µs/increment)
Interfaces
I/Os
1 opto-isolated input, 1 opto-isolated output
GPIOs
2 programmable GPIOs
As direct inputs: 0 to 0.8 VDC (low) / 2 to 24 VDC (high)
As open collector outputs: 3.3 to 24 VDC @ 25 mA
Digital interface
Micro-B USB 3.0 interface
Mechanics
Dimensions (L x W x H)
49.5 x 29 x 29 mm, including connectors, without tripod and lens
Mass
60 g (without lens)
Lens mount
For details, see
.
C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi), max. protrusion: 9.7 mm
CS-Mount: 12.526 mm (in air); Ø 25.4 mm (32 tpi), max. protrusion: 4.7 mm
M12-Mount: see
Conditions for operation and storage
Power requirements
Power over USB 3.0
Power consumption
Typical 2.7 W @ 5 VDC, maximum frame rate, full resolution, 20 °C
Operating temperature
+5 °C to +45 °C housing temperature (without condensation)
Storage temperature
-10 °C to +70 °C ambient temperature (without condensation)
Table 6: Specifications Mako U-029B
