Specifications
73
Manta Technical Manual V7.9.0
Trigger latency
1
Pixel format
Value
Mono8, Mono12Packed, BayerRG8,
BayerRG12Packed, YUV411Packed
31.92 µs
Mono12, BayerRG12, YUV422Packed
42.48 µs
RGB8Packed, BGR8Packed,
YUV444Packed
63.84 µs
Trigger jitter
1
Pixel format
Value
Mono8, Mono12Packed, BayerRG8,
BayerRG12Packed, YUV411Packed
±5.32 µs
Mono12, BayerRG12, YUV422Packed
±7.08 µs
RGB8Packed, BGR8Packed,
YUV444Packed
±10.64 µs
Body dimensions (L × W × H)
86.3 × 44 × 29
mm
Mass (typical)
PoE model: 200 g; Non-PoE model: 190 g
Temperature monitoring
Available for main board only.
Resolution 0.031; Accuracy ±1 °C
1
These values are calculated directly from the microcontroller source. These values are only valid for pixel formats < 16-bit per
pixel and applicable in both Idle and Frame valid states:
•
Idle state: sensor is ready and camera is idle, waiting for the next trigger
•
Frame valid state: sensor is reading out and camera is busy. If the next frame is requested by an external trigger in this
state, higher latency may occur as compared to the idle state.
Feature
Specification
Manta G-158B
Manta G-158C
Table 23: Manta G-158B, G-158C model specifications (continued)
