Specifications
98
Manta Technical Manual V7.9.0
Trigger latency
2
Pixel format
Value
Mono8, Mono12Packed, BayerRG8,
BayerRG12Packed, YUV411Packed
44.21 µs
Mono12, BayerRG12, YUV422Packed
58.65 µs
RGB8Packed, BGR8Packed,
YUV444Packed
88.06 µs
Trigger jitter
2
Pixel format
Value
Mono8, Mono12Packed, BayerRG8,
BayerRG12Packed, YUV411Packed
±
7.3 µs
Mono12, BayerRG12, YUV422Packed
±
9.75 µs
RGB8Packed, BGR8Packed,
YUV444Packed
±
14.65 µs
Body dimensions (L × W × H)
86.3 × 44 × 29
mm
Mass (typical)
PoE model: 200 g; Non-PoE model: 190 g
Temperature monitoring
Available for main board only.
Resolution 0.031; Accuracy ±1 °C
1
For more information on
StreamFrameRateConstrain
,
see the
GigE Features Reference
.
2
These values are calculated directly from the microcontroller source. These values are only valid for pixel formats <
16-bit per pixel and applicable in both Idle and Frame valid states:
•
Idle state: sensor is ready and camera is idle, waiting for the next trigger
•
Frame valid state: sensor is reading out and camera is busy. If the next frame is requested by an external trigger
in this state, higher latency may occur as compared to the idle state.
Feature
Specification
Manta G-319B
Manta G-319C
Table 36: Manta G-319B, G-319C model specifications (continued)