Camera interfaces
180
Manta Technical Manual V7.9.0
Gigabit Ethernet interface
The Gigabit Ethernet interface conforms to the IEEE 802.3 1000BASE-T standard
for Gigabit Ethernet over copper. To prevent electromagnetic interference (EMI)
and for best performance, Category 6 (or higher) S/STP cables and connectors are
recommended. Applications with longer cable lengths or harsh EMI conditions
require Category 7 (or higher) cables.
•
Cable lengths up to 100 meters are supported.
•
The 8-pin RJ-45 jack has the pin assignment according to the Ethernet
standard (IEEE 802.3 1000BASE-T).
•
For cameras that are PoE capable, the Gigabit Ethernet interface can be used
to provide power to the camera.
•
Manta PoE models can source power from IEEE 802.3af (1000 Mbit/s) and
from IEEE 802.3at compliant PSE devices (Power Sourcing Equipment) such as
switches injectors or NICs.
•
If both the Hirose I/O port and Gigabit Ethernet interface (via PoE) are used for
power, the camera will only use the power from the Hirose I/O port.
PoE capable cameras
PoE capable cameras have the letters PoE written on the camera’s label on the
bottom side of the camera.
Main board for Manta models
From serial number 503323258 on, all Manta models including PoE and board
level variants contain the same main board.
Accessories
Contact the Allied Vision Sales team or your local Allied Vision distribution partner
for more information on available accessories:
https://www.alliedvision.com/en/meta-header/contact-us.html
i
