Camera interfaces
188
Manta Technical Manual V7.9.0
Output block diagram
FrameReadout
Active at during frame readout, i.e. the transferring of image data from the
CCD to camera memory.
Imaging
High when the camera image sensor is either exposing and/or reading out
data.
Acquiring
Active during an acquisition stream.
SyncIn1
Active when there is an external trigger at
SyncIn1
.
SyncIn2
Active when there is an external trigger at
SyncIn2
.
Strobe1
The output signal is controlled according to
Strobe1
settings.
Figure 115: Output block diagram
Signal
Description
Table 85: Output signals (continued)
GPO
Output signal
Optocoupler
Polarity
selectable
via so
Ō
ware
Read from
so
Ō
ware
Output
mode
selectable
via so
Ō
ware
Acquisi
Ɵ
onTriggerReady
FrameTriggerReady
FrameTrigger
Exposing
FrameReadout
Acquiring
SyncIn1
SyncIn2
Strobe1