Section 4
4 - 31
10. Install clutch housing assembly into planetary
reducer by the same orientation as shown in the
view below. Torque capscrews to 33 ft-lbs (44 N-m).
11. Install new O-ring on clutch housing.
12. Install planetary reducer assembly. Torque capscrews
to 66 ft-lbs (90 N-m).
9. Planetary
Reducer
NOTE: Disassembling the reducer while it’s still
under its warranty period immediately invalidates
the warranty. If the reducer malfunctions before its
warranty period expires, please contact Allied Systems
Company fi rst before attempting to repair it.
9.1 Place the gear of primary carrier assembly (item 2)
into secondary carrier assembly (item 3), and place
both assemblies into ring gear (item 4) while aligning
gear teeth.
9.2 Place sun gear (item 1) into primary carrier assembly
(item 2). Sun gear should turn freely by hand.
9.3 Clean mating surfaces and apply a bead of gasket
eliminator to the face of the cover (Item 5) that
mates with the ring gear (item 4). See instructions
on sealant package.
9.5 Secure thrust washer (item 6) with tangs engaged in
cover (item 5).
NOTE: Washer can be secured to
cover with a small amount of grease or silicone
sealant. Install the cover and align with hub such
that pipe plug holes on cover align with mounting
holes on hub.
9.6 Place cover (item 5) on ring gear (item 4) as shown
above.
4
3
2
1
8
5
9
7
6
10
1. Sun
Gear
2.
Primary Carrier Assembly
3.
Secondary Carrier Assembly
4. Ring
Gear
5. Cover
6. Thrust
Washer
7. Magnetic
Fitting
8. Fitting
9. Fitting
10. Label
Clutch Housing
Assembly
Planetary Reducer
BRAKE-OFF Pressure Port
Allied Systems Lable
Fill Port Fitting
Magnetic Plug
Side Port
Use gasket
eliminator
between ring
gear and clucth
housing.
Summary of Contents for H12E
