5.2 BCS Mounting
The flat top Ho-Pac can be mounted on a
specific carrier with an adaptor bracket
that is bolted to the Ho-Pac top plate as
shown below. Brackets are available for
each mounting type and can be custom
designed when required. Each mounting
kit contains the mounting bracket,
fastener kit, pins; and bushings, spacers,
sleeve bushings and miscellaneous
hardware as required. The mounting
hardware varies by application and is
configured by Allied based on carrier
specifications. The illustration shown
below is a typical bracket; brackets vary
with the specific application.
BCS Mounting
7/21/03
14
Summary of Contents for Ho-Pac NT8900 Series
