SECTION 12.0
LIFTING & TRANSPORT
12.1 Lifting & Transporting Off Carrier
If the Ho-Pac is to be transported in-
dependently of the carrier;
1. Remove all loose debris from Ho-
Pac.
2. If the swivel assembly is installed,
lock swivel position with bolt.
3. Follow removal instructions in
Section 8.2.
4. Secure hoses to unit to avoid
accidental damage.
5. Lift Ho-Pac at approved lift points
only with appropriate lifting equip-
ment. See diagram in Section 4.4.
~
WARNING
~
Do not lift Ho-Pac by the mounting pins.
The Ho-Pac may shift and cause
damage or injury to personnel.
6.
Adequately stabilize and secure Ho-
Pac for transport.
12.2 Lifting & Transporting On Carrier
If the Ho-Pac is transported while
installed on the carrier:
1. Remove all loose debris from Ho-
Pac.
2.
If the swivel assembly is
installed, lock
swivel position with bolt.
3. Secure hoses to unit to avoid
accidental damage.
4. Inspect the mounting pins and
hardware for damage and integrity.
5. Transport carrier in accordance
with carrier manufacturer’s recom-
mendations.
7/21/03
28
Summary of Contents for Ho-Pac NT8900 Series
