10
- English
6-1624982 - rev.3 - 03/11/2021
5.3 ADVICE ON INSTALLATION
WHAT YOU CAN DO:
•
Ensure that the motor is installed on level.
•
The motor shall be installed
at least 50 mm from the lower edge of the gate door
.
•
The motor can be installed at the top of the gate door.
•
The motor can be installed on both left and right.
•
The motor can be installed with the body facing downwards or upwards depending on your needs.
WHAT
NOT
TO DO:
•
Do not install on sloping gates.
•
Do not unduly bend the motor cable.
•
Do not install the bracket in the gate in weak points that may break.
5.4 MOTOR UNLOCK FOR MANUAL MOVEMENT
To move the gate manually proceed as follows:
•
Turn the key clockwise to unlock the lever.
•
Pull the lever all the way down.
Once the gate is positioned to re-lock the motor:
•
Completely put the lever back inside its seat in the motor
body.
•
Hold the lever in place with one hand.
•
Close the lever lock by turning the key counterclockwise.
=
=
50 mm
